home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
USA Bestseller
/
USA BESTSELLER Vol 1-95 (Hepp-Computer)(1995).iso
/
e193
/
0150ter2._xe
/
MANUAL.EXE
/
CHANGES.TXT
< prev
next >
Wrap
Text File
|
1994-08-20
|
9KB
|
184 lines
If you are translating the manual you could use this file to quickly
upgrade the manual, so you won't have to go through the entire manual each
time a new version of Terminate comes out.
═════════════════════════════════════════════════════════════════════════════
This changed in the manual from 1.41 to 1.50
From this version you each helpfile that was changed will have all changes
at the same time. Please if you are translating the helpfiles. Run through
all manuals every time you upgrade a manual. You must use an editor that
allows you to have the standard english helpfile in one window and your new
file in another window. Qedit is able of foing this.
Helpfile Changed
─────────────────────────────────────────────────────────────────────────────
ALT-Z.TXT Sh-Esc moved to second column and AltF11+AltF12 in last column.
NEWFILE INTERNAT.HLP must be fully translated
* ALL * No lines must be longer than 77 chars. It is to ensure that most
printers will print out without trouble. TEST78 will now report
lines longer than 77 instead of longer than 78.
Everywhere is ascii/Ascii changed to ASCII.
Everywhere is ansi/Ansi changed to ANSI.
Everywhere is kb/Kb changed to KB.
Everywhere is mb/Mb changed to MB.
Everywhere is 2:231/111 changed to 2:236/111
TERMINAT Pulled out header of TERMINAT.HLP, inserted INTRODUCTION....
In the future when running MANUAL.EXE first the helpfiles
are compiled and the index created. Then they are copied
together: FRONTPGE.HLP+TERMINAT.IDX+TERMINAT.DOC = TERMINAT.DOC
Changed Alt-F9 ^hESC^n ^hRETURN^n
Alt-F9 ENTER changed colour to bold ^b (index problem)
Was totally repositioned, so many things changes not the actual
translation. Watch the color codes very carefully, since they
are changed so the MANUAL.EXE can create an index file.
Alt-M, File to terminal mode added
Alt-F9, removed bold color on I and RETURN
Alt-M,G S-Registers added
In general Alt-M should be rewritten
Alt-F1+Alt-F2 was changed
Alt-M Lock Keyboard -> Keyboard lock
Added List of countries
Alt-A changed to Alt-F11
Alt-F12 described
Alt-A is now the SmartPad, also change in ALT-Z.HLP menu
Insert DAN BBS in top and address
Alt-M changed.. Greenwich Mean Time inserted
Terminate Thesaurus in end
FILEMANA SPACE
Last 5 lines, explaining mail files
All letters are changed from bold to high ^h so they will be
found in the index.
Alt-J removed from DOS-shell
All keyword-lines was changed to they work in index.
Copy file have a few extra lines on printing
Switches around the Drive not present app. line 23-25
Added Changing directories
Added Q=Quiet
Head of menu is now called Terminate Commmander, copyright removed
MODEMDIA || will send a single | ..........
No connect strings changed from highlight to bold ^b
10 initstrings instead of 5
PROTOCOL CIS Quick B+ added
In external protocol menu, the !W Swap line is changed
!I and !A is explained below
CR/LF Translation changed to CR Translation LF Tran.. etc...
Signature / Signature Hex move to same line and seperated so
it will be found when jumping to the help.
All external protocol lines was moved 1 to the left, not menu
though, be carefull.
Batch upload added in bottom
Enable internal protocols was change to Enable protocols
USERSSET Security menu (Network lock) and the last lines about lock
Changes positions for encrypt logfile and network lock
Removed the highlight from ^hWhen calling systems......
Added a little to Callback
COSTMANA 3 lines added in menu and at the bottom. Secondary currency
Cost files changes to Cost file 1 Cost file 2 Cost file 3
Pr. changed to Per in menu and below in text
HOSTSETT External utilities changed to External 1...2...3 on same line
Shut down password changed to Shut down pwd
Changed menu, moved time up, expanded modem, AT BIOS
Fax receive was rewritten
Fax answer was rewritten
Fax directory has been deleted both in menu and text
Ring count was added
Callback wait was added
Logging in to the host mode was changed,
Alt-Y and Alt-J was explained below this
The commands was sorted
COMMUNIC Databits missed a space in menu, and moved down in front of
Databits (otherwise searching does not work)
Receive buffer size / Transmit buffer size was changed so the
search will work, copy line from original file.
'Comport settings' changed to 'Configure comports'
The space between Parity and the description is now 3 less
Uart/Serial and 5 lines down was moved 2 places to the left
Auto installation
Baudrate... 2 lines added.
POINTSYS Nodelist 1..2..3 on same line
GENERALM Filefinder/Scan drives changed. Copy from original file.
Release buffer was changed a little
Pause time / char now on same line.
Minimum diskspace inserted below, also changed in the
text below
ScrollBack buffer was changed
FILEPATH Run after download/upload changed. Copy from original file.
Download manager menu was changed, no text changed
Qwk reply files was moved 1 pos to the left, to match the rest
Added Semaphore directory+Exit file: menu and description
Added two lines: If you change the first wildcard..........
Viewer filename was changed. @LIST
Qwk reply files was changed.
LOGINSCR A search word for login scripts was not changed in the code
in the LOGINSCR.HLP it must still be called ^hMini Scripts^n.
PHONEBOO Edit/View has now again spaces between highlighted keyword
and text. That was made at the time only 600 lines was allowed.
Comment 1 & 2 changed, so i can be found
Time used/Connects changed to Time used/Connect, so it will
jump down to the correct place instead of stopping in menu.
Dial prefix Dial suffix now placed on same line (app. 467)
Changed from highlight to bold: ^h12->1200 , 24->2400
All keys was changed from bold to highligst, a lot was
repositioned.
^hO^nther changed to ^bO^nther in the first lines
UART ...14400 paragraf removed
POINTSYS The outbound window: the flags changed from high to bold ^b
Changed keyword ^b to ^h several places.
Zone is now better explained
Check BossSetup for positions
TOGGLESM Totally rewritten, beware of changes in menu-window
backup now also says: and note files
Reginfo bright changed
EMULATIO ^hC- = Ctrl Sh- = Shift^n changed to bold
^h@DIAL 5 6 7 8 9 10^n moved 1 to the left
Ansimusic changed to ANSI music
FILETAGG ^h+^n will .^h-^n... was changed from high to bold
Some keyword had 3 spaces before description. That was changed
to 2 spaces.
The first 30-50 lines was completely rewritten.
Tagged files / Tagged from was changed and additional info
was appended.
Menu was repositioned
G GenTag was added
U UnTag was added
SCRCOLOR Blind palette and two extra lines for this.
MAINCONF Commandline switches has now no spaces, to the left and
highlighted. All /xxxx has been moved 1 pos to the right.
Errorlevels in the bottom was added.
/NOIMPORT was added
FAXMANAG New file, must be translated in full
SCRCOLOR Added Purple palette
Added 3 palettes Intense 1-3 and made a new switch
called, use intensity.
ENDOFMAN Was changed slightly, please adjust
═════════════════════════════════════════════════════════════════════════════